Hybrid 3-Phase Inverter — Solar + Battery + Grid support.
10 kW Nominal Output with up to ~16 kW PV input.
Fast UPS/EPS Backup (~10 ms) for critical loads.
Dual MPPT & Smart Power Flow for optimized solar utilization.
IP65/66 Protection — Suitable for indoor/outdoor installation.
Battery Compatibility — 48 V low-voltage lead-acid/LiFePO
Original price was: 270,000৳ .240,000৳ Current price is: 240,000৳ .
The Growatt WIT 10kW-HU inverter is a three-phase hybrid inverter designed for residential and small industrial applications. It is known for its affordable price and high quality. The inverter is certified for the global market and is commonly used in pro-consumer installations. It comes in various capacities ranging from 4kW to 15kW.
One of the key features of the WIT inverter is its backup output for EPS (Emergency Power Supply) circuits and possibility to work with LOW VOLTAGE (48V) batteries
This output can operate in two modes:
To further enhance its functionality, Growatt WIT10KW Three Phase Inverter Growatt offers the option to pair the WIT inverter with AXE energy storage systems. These energy storage solutions have capacities ranging from 5.1 kWh to 30,6 kWh. By combining the Growatt WIT inverter with AXE energy storage, users can maximize self-consumption of the energy generated. Instead of sending excess energy to the grid, it is stored in the batteries, reducing reliance on energy prices set by the distribution company. This setup promotes greater energy independence.
The Growatt WIT10KW Three Phase Inverter WIT inverters are compatible with LiFePo4 batteries and backup power systems, providing flexibility for various energy storage configurations. Additionally, when combined with an energy meter, the WIT inverters can activate the export limit function, allowing users to regulate the amount of energy they export to the grid. This feature enables the generation of energy balances for the entire building, promoting efficient energy management.
Overall, the Growatt WIT 10kW-HU inverter offers a cost-effective and high-quality solution for residential and small industrial applications. Its hybrid capabilities, EPS backup output, compatibility with AXE energy storage, and ability to activate export limits make it a versatile choice for those seeking efficient energy management and greater energy independence. Growatt WIT10KW Three Phase Inverter
Growatt WIT10KW Three Phase Inverter travel to you by insured transport. Shipments are packed with great care in such a way that the inverter arrives at its destination undamaged.
Max. Recommended PV Power (STC): ~16,000 W
Max. DC Input Voltage: 1,000 V
MPPT Voltage Range: ~150 V – 850 V
Start-up Voltage: ~180 V
Number of MPPTs: 2
Max. Input Current per MPPT: ~20 A
Nominal AC Power: 10,000 W (10 kW)
Max. Apparent Power: ~11,000 VA
AC Voltage (Nominal): 3-phase 220/380 V or 230/400 V (±15%/ +10%)
Frequency: 50/60 Hz auto detection
Max. Output Current: ~13.3 A @ 230 V
THD (Total Harmonic Distortion): < 3%
Load Unbalance Support: 100% unbalanced (all phases)
Backup (EPS/UPS) Switch Time: ~10 ms
AC Overload Capability: ~110% continuous, ~200% for seconds (10 s)
Battery Type: Lead-acid or Lithium-ion (LiFePO₄)
Battery Voltage Range: ~40 – 60 V (nominal ~51.2 V)
Max. Charge/Discharge Current: ~220 A – 290 A range depending on source
BMS Interface: RS485 / CAN
Max. Conversion Efficiency: ~97.6 %
European Efficiency: ~97.0 %
Operating Temperature: ~-30 °C to +60 °C
Max Operating Altitude: ~< 3,000 m
Cooling: Natural convection + smart cooling
Protections: DC polarity reverse, over-current, short circuit, over/under voltage, over temperature, anti-islanding, ground fault, etc.
